Lumintop Torpedo 007 Flashlight Review

This little Lumintop Torpedo 007 actually looks like a little torpedo, but is a flashlight! It uses a Cree XP-L HD emitter, and 16340 cell.

---

Official Specs and Features

Here’s a link to the Lumintop Torpedo 007 flashlight product page.

Versions

Really there’s just one version of the Torpedo but there is another light – that is, a light with another name – which differs only in finish.  That light is the Elfin.  I’m actually not sure why these lights even got different names.

MSRP

The MSRP of this light appears to be $48.90.  It’s available in stores like Banggood.com with tritium for around $55.  It’s a worthwhile addition in my opinion.

---

Short Review

Despite how this light might appear (simple and hard to carry), I really like it. More importantly, I like carrying it.  I view it as a kind of big keychain light.  It’s actually not much bigger than a light like the Nitecore TIP and can be attached similarly.

Long Review

The Big Table

Lumintop Torpedo 007
Emitter:	Cree XP-L (V5)
Price in USD at publication time:	$48.90
Cell:	1×16340
Turbo Runtime
LVP?
Switch Type:
On-Board Charging?	No
Claimed Lumens (lm)	520
Claimed Throw (m)	87
Candela (Calculated) in cd (at 30s)	288lux @ 3.093m = 2755cd
Throw (Calculated) (m)	105.0 (120.7% of claim)^
All my Lumintop reviews!

^ Measurement disclaimer: Testing flashlights is my hobby. I use hobbyist-level equipment for testing, including some I made myself. Try not to get buried in the details of manufacturer specifications versus measurements recorded here; A certain amount of difference (say, 10 or 15%) is perfectly reasonable.

What’s Included

• Lumintop Torpedo 007
• Spare o-rings (2)
• Keyring attachment
• Manual

Package and Manual

The light arrives in a flip-top (ring display type) box, inside a cardboard sleeve.  The light sits in the box diagonally.  My box was damaged a little bit, but the light was in fine shape.

The manual is very simple.  There are some specifications listed, and …. mostly it’s just specifications.  The UI is described but, as this is a very simple UI, it’s not incredibly wordy.  In fact, it says simply “Click the tail cap switch to change the mode (Low Mid High Moonlight Circle)”.

Build Quality and Disassembly

The Torpedo is actually stainless steel, which for some strange reason is a favorite of mine.  It’s thin and small enough that it doesn’t have a terrible weight, though.

A fancy “fire ring” resides at emitter level on the body.  The product listing mentions copper but I don’t think this is actually copper.  The “gold” has actually begun to rub off too.  I don’t think it’s this gold finish that Lumintop is calling copper, though….  Here’s what they say exactly:

“And the inner copper tube body provides a better heat dissipation.”

Other listings say it’s just the pill (basically).  Anyway, I don’t know what if anything, is copper on the body of light.  It does get hot fast on high though, which does agree that something’s moving that heat very well.

Here you can see the tailcap and the head in detail.  The tailcap is actually in need of some reeding to allow purchase for cell swapping.  I’m quite surprised in fact, that there’s nothing there to help with unscrewing.  Still, it’s not that hard, it’s just hard to know if it’s tight enough to prevent ingress of water.

It’s fairly easy to take the light apart.  The bezel, though smooth, can be removed.  The reflector comes right out, allowing access to the mcpcb.  I didn’t take it apart further, though I did try to unscrew the “flame ring” and had no success.  You can also see that the tail has a spring, but the head has only a donut.  That donut doesn’t cover the brass button, so flat or button top cells should work.  I tested both protected and unprotected and all worked.

There’s a slot in the switch for a single tritium vial.  This sample was sent to me with tritium installed, fortunately.  I have always been excited about a light with tritium, and I’m pleased to have it.  But I can say that it’s much dimmer than I expected (even though I was warned!).  I still like it, and I’ve since added it to other lights (including the BOSS, which I already reviewed).

Size

I could hardly believe it when I noticed this, but the Torpedo is literally exactly the same size as an unprotected 18650.  It even fits into my BOSS tube (but not Convoy tubes!).  Since it’s the same size as an 18650 cell, the dimensions are obviously…. 18mm x 65mm.

Retention

The light comes with a key ring of sorts that attaches on the tailcap.  There is no pocket clip included, nor is there even a pocket clip option.  There’s no magnet or pouch.

I carry this light deep in my pocket.  I actually carried this light for a while before I took photos of it, so wear is visible.  That’s the nature of the beast.  For me it’s expected and enjoyed.  I’m a starter on #TeamNoShelfQueen….

Power

A single 16340 powers this light.  It’s not big enough for 18350’s.  CR123a’s will work too of course.

I tested the runtime and cooled the light with a fan for [most of] that test.  Runtime on High terminated at around 3.5V.  Here’s the graph of that:

Nothing spectacular, but the runtime does hold very steady for about 40 minutes after the stepdown(s).  Temperature does seem to creep up, however.

User Interface and Operation

One tail switch operates this light.  And while it might seem like a forward clicky, it’s actually an e-switch.  Unfortunately, there aren’t any magical additions to the UI due to this being an e-switch.  Not only that, it seems designed to function exactly like a forward clicky, too.  The UI is simple – in fact just exactly like the UI of the TorchLAB BOSS.  Click for on.  If you want a different mode, click off then on until you get to the mode you want, and leave the light on in that mode.

Modes

Mode	Claimed Output (lm)	Claimed Runtime	Measured Lux^
Moonlight	0.5	25d	9
Low	15	40h	276
Mid	100	7h	1715
High	520	1.5h	11260

^ This category is as yet meaningless since I don’t have a calibrated sphere.  I’m still recording these values and working on calibration.

LED and Beam

The emitter here is a Cree XP-L V5.  The emitter sits behind a lightly orange peeled reflector.  The reflector isn’t very deep.  The beam has a broad spot but not a ton of spill – it’s actually similar to a TIR (which I love) except for the small bit of spill.

Beamshots

These beamshots are always with the following settings:  f8, ISO100, 0.3s shutter, and manual 5000K exposure.

 

Random Comparisons and Competitive Options….

The only other available stainless steel cr123a light I can think of is the Olight S Mini.  That’s definitely a fun light.  It’s shorter and thicker than the Torpedo, and lacks a certain…. torpedo…. look.  Both are e-switch lights but the S Mini has a side switch, and a pocket clip, and has the beam profile of a TIR (because it has a TIR!).  Deciding between these two will probably come down to how you’ll actually use it, not the features set.  The Torpedo wins for “gentlemanly carry” type use.

Conclusion

What I like

• Stainless steel body
• The gold ring (copper?) is a nice touch, as is the flame engraving (which is accurate because that part of the light gets hot on High!)
• The design of the “torpedo”
• Tritium (included, if you choose)

What I don’t like

• UI is a bit primitive for an e-switch
• No clip whatsoever

---

Notes

• This light was provided by BangGood.com for review. I was not paid to write this review.
• This content originally appeared at zeroair.org.  Please visit there for the best experience!
• For flashlight-related patches, stickers, and gear, head over to PhotonPhreaks.com!
• Use my amazon.com referral link if you’re willing to help support making more reviews like this one!
• Please support me on Patreon! I deeply appreciate your support!