Wurkkos TS10 Flashlight Review
Wurkkos released the TS10 flashlight, and really dropped a hit! This triple-emitter, 14500-cell flashlight packs a punch and used Andúril2!!
Official Specs and Features
Here’s a link to the Wurkkos TS10 flashlight product page.
Versions
Versions, hmm. Well, there are a bunch! There are body colors. Red (seen here), black, blue, silver, and green. There are emitter options – maybe all CSP LED but available in 4000K (seen here), 5800K, and I think at one time, 6500K. Also available are auxiliary colors – red (seen here), orange, blue, and green. And finally, you can get this as a package with a 14500 (as seen here, recommended).
Price
This light is available right now for the incredible price of $19.99! Even if you see this light as a toy (and you well may), it’s certainly still worth the price of $20! The Wurkkos TS10 flashlight is available at wurkkos.com.
Short Review
As I said, you may come to see this light as a toy. It’s a fun toy though, and it’s inexpensive. It’s not cheap, just inexpensive. I think Wurkkos is making some of the best value lights available today, and this TS10 is right up there at the top of that list. These CSP LEDs are surprisingly good. Andúril2 is very good. All in all, this is just a great value light (or toy, you decide.)
Long Review
The Big Table
| Wurkkos TS10 (Red) Flashlight | |
|---|---|
| Emitter: | CSP LED (4000K) |
| Price in USD at publication time: | $19.99 |
| Cell: | 1×14500 |
| Runtime Graphs | |
| LVP? | Switch to low |
| Switch Type: | E-Switch |
| Quiescent Current (mA): | ? |
| On-Board Charging? | No |
| Claimed Lumens (lm) | 1400 |
| Measured Lumens (at 30s) | 1040 (74.3% of claim)^ |
| Candela per Lumen | 4.8 |
| Claimed Throw (m) | 129 |
| Candela (Calculated) in cd (at 30s) | 24lux @ 4.948m = 588cd |
| Throw (Calculated) (m) | 48.5 (37.6% of claim)^ |
| Claimed CCT | 4000 |
| Measured CCT Range (K) | 3500-4200 Kelvin |
| Item provided for review by: | Wurkkos |
| All my Wurkkos reviews! | |
^ Measurement disclaimer: I am an amateur flashlight reviewer. I don’t have $10,000 or even $1,000 worth of testing equipment. I test output and such in PVC tubes!! Please consider claims within 10% of what I measure to be perfectly reasonable (accurate, even).
What’s Included
- Wurkkos TS10 flashlight
- Wurkkos 900mAh 14500 (optional)
- Pocket clip
- Lanyard
- Spare o-rings (2)
- Manual etc
Package and Manual
Unlike the Andúril2 light I just reviewed (the Lumintop FW1AA), the Wurkkos TS10 flashlight appears to use standard Andúril2.
Build Quality and Disassembly
For $20 I am not sure what you might expect. Whatever you do expect, I’d say that this Wurkkos TS10 flashlight sets the build-quality standard for $20 lights. This is a nice quality light!
Since this TS10 uses a tail e-switch, there’s an inner sleeve on the cell tube. That can be seen below (the black bit). The threads are unanodized and square-cut, but fairly small.
Only the tail end has a spring; the head has only a button.
I didn’t remove the tailcap or bezel.
Size and Comps
Dimension: 71.5 mm (length) × 21mm (head diameter)
Weight: 32 ± 1 grams (without battery)
If the flashlight will headstand, I’ll show it here (usually the third photo). If the flashlight will tailstand, I’ll show that here, too (usually the fourth photo).
Here’s the test light with the venerable Convoy S2+. Mine’s a custom “baked” edition Nichia 219b triple. A very nice 18650 light.
Also above is the light beside my custom engraved TorchLAB BOSS 35, an 18350 light. I reviewed the aluminum version of that light in both 35 and 70 formats.
Notably, the Wurkkos TS10 flashlight is smaller than another very similar light. That’s the Lumintop FWAA. I’ve reviewed a number of iterations of those, including titanium/copper.
Retention and Carry
The Wurkkos TS10 flashlight uses a two-way pocket clip.
It’s a friction-fit clip (unlike what’s used on the FWAA, which is a collar-style clip.)
This clip has a couple of options for lanyard attachment, including a hole in the shoulder, and a long slit down the side.
The lanyard attaches only in these holes – there is no lanyard hole in the body.
Power and Runtime
The Wurkkos TS10 flashlight is powered by a single lithium-ion cell. The size is 14500. I found that both my button top and flat tops worked fine but I really only had the gold Vapcell you see below in flat/button formats. So really the same cell. This light does not support 1.5V cells!
Put the cell in the normal way – positive toward head.
In case you forget which way the cell goes, check the little silk-screen logo on the tail.
Here are a number of runtimes. Output is really fantastic, briefly. Over 1000 lumens for around a minute is pretty crazy for such a tiny light. That’s going to make a lot of heat, so it’s unreasonable to think that’d last for too long.
When we get down to the third highest output level (the level I call “level 7”), we see very stable output for well over an hour.
With regard to low voltage protection, the light seems to step down to a very low level. This is a typical Andúril characteristic.
Modes and Currents
| Mode | Mode Claimed Output (lm) | Claimed Runtime | Measured Lumens |
|---|---|---|---|
| Turbo (Double click from on state) | 1400 | 1h14m | 1345 (0s) 1040 (30s) |
| Highest stepped | 900 | 1h29m | 454 |
| 7 | 580 | 1h20m | 187 |
| 6 | 300 | 1h24m | 38 |
| 5 | 130 | 2h43m | 15 |
| 4 | 50 | 6h43m | 5 |
| 3 | 10 | – | 1 |
| 2 (Lowest stepped output) | 1 | – | 0.1 |
| 1 (Lowest ramping output) | – | – | 0.009 |
Pulse Width Modulation
I’ve done mostly the same thing here that I do with other Andúril lights – the lowest mode (far left) is the lowest of ramping. Because that’s much lower than the lowest stepped mode (annoying!). Then from the second photo to the far right is each of the stepped modes (with the far right being the “double click to turbo” mode). All modes except the highest have PWM (again, not a surprise for Andúril, and doesn’t look to have been sped up for Andúril2.
For reference, here’s a baseline shot, with all the room lights off and almost nothing hitting the sensor. Also, here’s the light with the worst PWM I could find. I’m adding multiple timescales, so it’ll be easier to compare to the test light. Unfortunately, the PWM on this light is so bad that it doesn’t even work with my normal scale, with is 50 microseconds (50us). 10ms. 5ms. 2ms. 1ms. 0.5ms. 0.2ms. In a display faster than 0.2ms or so, the on/off cycle is more than one screen, so it’d just (very incorrectly) look like a flat line. I wrote more about this Ultrafire WF-602C flashlight and explained a little about PWM too.
User Interface and Operation
There’s a single switch for interacting with the Wurkkos TS10 flashlight. It’s an e-switch, with a big button.
This button has a nice texture and a great action.
The action is very low.
Andúril2 is great, and I think it’s an improvement over the first iteration(s). There are some things some users might not love about it, but I think overall it’s much more approachable. I will note though that the nomenclature might be a bit confusing – the light (all lights with Andúril2) ships in Simple UI. This is not Muggle Mode. You may think “well duh” and by now you’ve already seen the blistering runtime on turbo of Simple, so you get it. But just be aware, don’t hand this light to the uninitiated thinking they won’t set their hand on fire while using Simple UI. Here is where I’d tell you how to switch to muggle mode. There is no muggle mode.
Here’s a UI table! This table is directly from ToyKeeper’s Andúril2 manual, which you can view here:
http://toykeeper.net/torches/fsm/anduril2/anduril-manual.txt
I am putting this in a table here with ToyKeeper’s permission. Thanks, TK! This is so much better than me writing it because it’s more reliable, and I completely trust its accuracy (at least, if I can paste it accurately). I’m breaking it up a little differently than ToyKeeper did, though I certainly understand why it was done her way originally.
First, the table for Either User Interface. These actions work whether you’re in Simple or Advanced UI.
| State | Action | Result |
|---|---|---|
| Off | 1C | On (ramp mode, memorized level) |
| Off | 1H | On (ramp mode, floor level) |
| Off | 2C | On (ramp mode, ceiling level) |
| Off | 3C | Battcheck mode |
| Off | 4C | Lockout mode |
| Off | 13H | Factory reset (on some lights) |
| Off | 15+C | Version check |
| Ramp | 1C | Off |
| Ramp | 1H | Ramp (up, with reversing) |
| Ramp | 2H | Ramp (down) |
| Ramp | 3H | Tint ramping (on some lights) |
| Ramp | 3H | Momentary turbo (on lights without tint ramping) |
| Ramp | 4C | Lockout mode |
| Lockout | 1C/1H | Momentary moon (lowest floor) |
| Lockout | 2C/2H | Momentary moon (highest floor, or manual mem level) |
| Lockout | 4C | On (ramp mode, memorized level) |
| Lockout | 4H | On (ramp mode, floor level) |
| Lockout | 5C | On (ramp mode, ceiling level) |
| Batt check | 1C | Off |
A table for only Simple User Interface:
| State | Action | Result |
|---|---|---|
| Off | 2H | On (momentary ceiling level) |
| Off | 10H | Disable Simple UI |
| Ramp | 2C | Go to/from ceiling |
A table for only Advanced (aka “Full”) User Interface:
| State | Action | Result |
|---|---|---|
| Off | 2H | On (momentary turbo) |
| Off | 3H | Strobe mode (whichever was used last) |
| Off | 5C | Momentary mode |
| Off | 7C | Aux LEDs: Next pattern |
| Off | 7H | Aux LEDs: Next color |
| Off | 10C | Enable Simple UI |
| Off | 10H | Simple UI ramp config menu (1: floor, 2: ceiling, [3: steps]) |
| Ramp | 2C | Go to/from ceiling (or turbo if at ceil already) |
| Ramp | 3C | Change ramp style (smooth / stepped) |
| Ramp | 5C | Momentary mode |
| Ramp | 5H | Sunset timer on, and add 5 minutes |
| Ramp | 7H | Ramp config menu (1: floor, 2: ceiling, [3: steps]) |
| Ramp | 10C | Turn on manual memory and save current brightness |
| Ramp | 10H | Manual memory config menu (1: off, 2: set timeout) |
| Lockout | 7C | Aux LEDs: Next pattern |
| Lockout | 7H | Aux LEDs: Next color |
| Lockout | 10H | Auto-lock config menu (1: set timeout) |
| Strobe (any) | 1C | Off |
| Strobe (any) | 2C | Next strobe mode |
| Strobe (any) | 3H | Tint ramping (on some lights) |
| Strobe (any) | 5C | Momentary mode (using current strobe) |
| Candle | 1H/2H | Brighter / dimmer |
| Candle | 5H | Sunset timer on, add 5 minutes |
| Party strobe | 1H/2H | Faster / slower |
| Tactical strobe | 1H/2H | Faster / slower |
| Biking | 1H/2H | Brighter / dimmer |
| Lightning | 1H | Interrupt current flash or start new one |
| Batt check | 2C | Next blinky mode (Temp check, Beacon, SOS) |
| Batt check | 7H | Voltage config menu |
| Temp check | 1C | Off |
| Temp check | 2C | Next blinky mode (Beacon, SOS, Batt check) |
| Temp check | 7H | Thermal config menu |
| Beacon | 1C | Off |
| Beacon | 1H | Configure beacon timing |
| Beacon | 2C | Next blinky mode (SOS, Batt check, Temp check) |
| SOS | 1C | Off |
| SOS | 2C | Next blinky mode (Batt check, Temp check, Beacon) |
| Momentary | Any | On (until button is released) |
| Momentary | Disconnect power | Exit Momentary mode |
| Config menus | Hold | Skip current item with no changes |
| Config menus | Release | Configure current item |
| Number entry | Click | Add 1 to value for current item |
LED and Beam
This is a triple-emitter light – there are three emitters. They are “CSP LED” emitters, and are rated at 4000K.
They are really fantastic emitters.
I didn’t get any photos of the secondary emitters. In this case, they’re red. Some early versions of this light had a bug where the secondary emitters would stay on when the light was turned on. Neither of mine are this way. All the ones shipping now are fixed.
LED Color Report (CRI and CCT)
Rated at 4000K, the output is in that range for sure. From the lower output (at left) of 3500K to the highest output at around 4200K, 4000K is a good rating, and reasonable. I’m also pleased to say that these CSP emitters are very high CRI!
Beamshots
These beamshots are always with the following settings: f8, ISO100, 0.3s shutter, and manual 5000K exposure.
Tint vs BLF-348 (KillzoneFlashlights.com 219b version) (affiliate link)
I keep the test flashlight on the left, and the BLF-348 reference flashlight on the right.
I compare everything to the KillzoneFlashlights.com 219b BLF-348 because it’s inexpensive and has the best tint!
Conclusion
What I like
- Low cost
- Great build quality
- CSP emitters are both 4000K and very high CRI
- Uses Andúril2
What I don’t like
- Secondary emitters drain the 14500 quickly when set to high
- Doesn’t support AA (1.5V) cells
Notes
- This content originally appeared at zeroair.org. Please visit there for the best experience!
- For flashlight-related patches, stickers, and gear, head over to PhotonPhreaks.com!
- Use my amazon.com referral link if you’re willing to help support making more reviews like this one!
- Please support me on Patreon! Feeding flashlights is expensive! And funding Fun Fund Friday even more so. I deeply appreciate your support!
