Speras EST MIC Flashlight Review
The Speras EST MIC flashlight is a compact, affordable (included) 10440 light with USB-C charging, a forward clicky, and a few quirks worth considering.
Official Specs and Features
Here’s a link to the Speras EST MIC flashlight product page.
Versions
There’s just one version of the Speras EST MIC flashlight, but it’s available in four body colors: black, orange, green, and gray.
Price
The Speras EST MIC flashlight sells for $29.99 and is available now.
What’s Included
- Speras EST MIC flashlight
- Speras 10440
- Charging cable
- Spare O-rings (2)
- Manual
Package and Manual
Build Quality and Disassembly
The Speras EST MIC flashlight has a good build quality for the price. There’s nothing at all surprisingly bad about the light, but $30 feels like about the right price.
This is a fairly simple flashlight, with one twist (which you can check out in the “Charging” section).
The head has just a button for contacting the cell, but the tail has a long spring.
Size and Comps
Dimensions 94.2 (Length) x 16.4 (Head) x 15 (Tube)mm
Weight 27.8g (exclude the battery)
Here’s the light in hand:
Here’s the test light with the venerable Convoy S2+. This is a brass version, which is a good bit heavier than aluminum, but has the same dimensions: 24mm in diameter by 117.5mm in length.
Also in the photo above, my Standard Reference Material (SRM) flashlight is the Hanko Machine Works Trident, an 18350 light. While I have not reviewed or tested the Gunner Grip version seen here, I have tested a Hanko Machine Works Trident Total Tesseract in brass. I love the Trident, and it’s a striking contrast to the inexpensive Convoy S2+, another great SRM.
Retention and Carry
The Speras EST MIC flashlight includes only a two-way pocket clip, which attaches only to the tail end.
Nothing else is included for carrying the Speras EST MIC flashlight.
Power and Runtime
The Speras EST MIC flashlight runs a single 10440 lithium-ion cell. A button-top cell is included.
It can not run an AAA cell.
The cell goes into the light in the usual way: positive end toward the head.
Here are a couple of runtime tests.
The temperature lines in these charts are included as general context, not precise measurements. The values represent the range (min to max) during testing, but should not be taken as exact readings. A temperature sensor is not always attached to the bezel (or even the hottest spot, assuming that could be defined). Even with ideal placement, too many variables affect temperature to definitively state a specific max value.
Charging
Here’s the interesting twist about the Speras EST MIC flashlight. The head twists “open” to reveal a USB-C charging port!
An A to C charging cable is included.
Charging looks mostly fine and is consistent with C to C and A to C both.
Modes and Currents
| Mode | Mode Claimed Output (lm) | Claimed Runtime | Measured Lumens | Tailcap Amps |
|---|---|---|---|---|
| High | 700 | 1.2h | 506 (0s) 421 (30s) |
1.65 |
| Medium | 100 | 2h | 155 (0s) 150 (30s) |
400mA |
| Low | 5 | 50h | [low] | 19.6mA |
Pulse Width Modulation
The lower two modes do use PWM, but the highest mode does not. The PWM that is here is fairly fast, and you’ll probably not notice it during use.
Click here to see a “baseline” – a chart with almost no light hitting the sensor.
Then there’s the Ultrafire WF-602C flashlight, which has some of the worst PWM I’ve seen. It’s so bad that I used a post about it to explain PWM! Here are multiple timescales (10ms, 5ms, 2ms, 1ms, 0.5ms, 0.2ms) to make comparing this “worst” PWM light to the test light easier. That post also explains why I didn’t test the WF-602C at the usual 50us scale.
User Interface and Operation
The Speras EST MIC flashlight uses a mechanical tail clicky.
It’s a forward clicky, so you can activate the light in momentary mode.
Here’s a user interface table!
| State | Action | Result |
|---|---|---|
| Off | Click | On (memory) |
| On | Click | Off |
| On | Tap | No change |
| Off | Tap | Momentary |
| Off | Repeated taps | Mode advance |
LED and Beam
The Speras EST MIC flashlight uses a Luminus SST12 emitter. That emitter is behind a TIR.
LED Color Report (CRI and CCT)
I don’t know that Speras makes any claim on the CCT of this light, but it’s cool white, at around 6300K. The CRI is low, too.
CCT (Correlated Color Temperature) refers to the measurement of the color appearance of light, expressed in Kelvins (K), which indicates whether the light is warm (yellowish) or cool (bluish). A lower CCT (below 3000K) is considered warm light, while a higher CCT (above 5000K) gives cooler, bluish light.
CRI (Color Rendering Index) is a measure of how accurately a light source renders colors in comparison to natural sunlight. Scored on a scale from 0 to 100, higher CRI values indicate that colors appear more true to life and vibrant, similar to how they would look under the sun.
Beamshots
These beamshots always have the following settings: f8, ISO100, 0.3s shutter, and manual 5000K exposure. These photos are taken at floor level, and the beam hits the ceiling around 9 feet away.
Tint vs BLF-348 (KillzoneFlashlights.com 219b version) (affiliate link)
I keep the test flashlight on the left and the BLF-348 reference flashlight on the right. These photos are taken around 18 inches from the door.
I compare everything to the KillzoneFlashlights.com 219b BLF-348 because it’s inexpensive and has the best tint!
Summary and Conclusion
The Speras EST MIC flashlight is a tiny, straightforward 10440 flashlight with decent build quality and an interesting twist-to-open USB-C charging port. I like the forward-clicky switch and simple interface, particularly the momentary operation and mode changes through repeated taps. The included cell and two-way pocket clip make it a reasonably complete package for $29.99. Unfortunately, it can’t use a standard AAA cell, the output is cool white with low CRI, and the lower modes use PWM. It’s a decent little light, but there’s nothing particularly remarkable here beyond the charging implementation.
The Big Table
| Speras EST MIC Flashlight | |
|---|---|
| Emitter: | Luminus SST12 (Cool white) |
| Price in USD at publication time: | $29.99 |
| Cell: | 1×10440 |
| Runtime Graphs | |
| LVP? | Unsure |
| Switch Type: | Mechanical |
| On-Board Charging? | Yes |
| Charge Port Type: | USB-C |
| Charge Graph | |
| Power off Charge Port | – |
| Claimed Lumens (lm) | 700 |
| Measured Lumens (at 30s) | 421 (60.1% of claim)^ |
| Candela per Lumen | 10.1 |
| Claimed Throw (m) | 138 |
| Candela (Calculated) in cd (at 30s) | 145lux @ 5.425m = 4267cd |
| Throw (Calculated) (m) | 130.7 (94.7% of claim)^ |
| Claimed CCT | Cool white – |
| Measured CCT Range (K) | Cool white 6200-6400 Kelvin |
| Item provided for review by: | Speras |
| All my Speras reviews! | |
^ Measurement disclaimer: Testing flashlights is my hobby. I use hobbyist-level equipment for testing, including some I made myself. Try not to get buried in the details of manufacturer specifications versus measurements recorded here; A certain amount of difference (say, 10 or 15%) is perfectly reasonable.
What I like
- Interesting twist-to-open USB-C charging
- Forward-clicky mechanical switch
- Momentary operation
- Good build quality for the price
- Includes a 10440 cell
- Compact and lightweight
What I don’t like
- Cannot use standard AAA cells
- Cool-white, low-CRI output
- PWM on the lower two modes
- No runtime or output measurements available in the current test data
- $29.99 feels about right, rather than particularly inexpensive
Notes
- This content originally appeared at zeroair.org. Please visit there for the best experience!
- Please use my Amazon.com referral link to help support zeroair.org!
- Please support me on Patreon! I deeply appreciate your support!
Discover more from ZeroAir Reviews
Subscribe to get the latest posts sent to your email.









































