Wurkkos HD04 pocket flashlight

Wurkkos HD04 Pocket Flashlight Review

Wurkkos HD04 Pocket Flashlight Review

The Wurkkos HD04 Pocket flashlight has a multi-angle rotating head, spot, flood, and RGB LEDs. USB-C charging and a glow-in-the-dark body finish the package.


Official Specs and Features

Here’s a link to the Wurkkos HD04 Pocket flashlight product page.

Versions

The Wurkkos HD04 Pocket flashlight is available in one version but three body colors: black, white, and blue.

Price

All body colors of the Wurkkos HD04 Pocket flashlight are priced at $27.99.


What’s Included

Wurkkos HD04 pocket flashlight what's included

  • Wurkkos HD04 Pocket flashlight
  • Charging cable
  • Lanyard
  • Manual

Package and Manual

Wurkkos HD04 pocket flashlight box

Wurkkos HD04 pocket flashlight box and package

Wurkkos HD04 pocket flashlight manual

Build Quality and Disassembly

Wurkkos HD04 pocket flashlight

The Wurkkos HD04 Pocket flashlight has a plastic body. The head is metal, and that should help with heat management of this 750-lumen (claimed) light.

One of the main selling points of the Wurkkos HD04 Pocket flashlight is the rotating head. Wurkkos describes it as “95° tilt + 180° rotation.” It’s very neat and could be useful.

Wurkkos HD04 pocket flashlight side view

The body being plastic means I didn’t disassemble the light at all.

Size and Comps

71mm x 23.8mm x 36.8mm and 56g.

Here’s the light in hand:

Here’s the test light with the venerable Convoy S2+. The version below is a custom laser-engraved Convoy S2+ host by GadgetConnections.com. I did a full post on an engraved orange host right here! Or go straight to GadgetConnections.com to buy your Convoy S2+ now!

Also in the photo above, my Standard Reference Material (SRM) flashlight is the Hanko Machine Works Trident, an 18350 light. While I have not reviewed or tested the Gunner Grip version seen here, I have tested a Hanko Machine Works Trident Total Tesseract in brass. I love the Trident, and it’s a striking contrast to the inexpensive Convoy S2+, another great SRM.

Retention and Carry

The Wurkkos HD04 Pocket flashlight package includes a lanyard. This lanyard attaches through a hole in the clip area of the back of the HD04.

Wurkkos HD04 pocket flashlight lanyard

It’s a very simple lanyard.

Wurkkos HD04 pocket flashlight lanyard

The clip is also a reasonable and good means for holding the light in place. The mouth opens very wide!

Wurkkos HD04 pocket flashlight clip

At the bottom of this light is a magnet. The light weighs little, and the magnet is sufficient for holding it. It’s during magnet use that the tilting and rotating head really shine!

Wurkkos HD04 pocket flashlight magnet in use

Power and Runtime

The Wurkkos HD04 Pocket flashlight uses a built-in 600mAh LiPO.

Wurkkos HD04 pocket flashlight runtime charts

I wouldn’t have expected this light to get anywhere near 750 lumens, but it does a remarkable job – it’s still at 627 lumens after 30 seconds, and around 600 after 1.5 minutes. Not bad at all.

Wurkkos HD04 pocket flashlight runtime charts

Wurkkos HD04 pocket flashlight runtime charts

Wurkkos HD04 pocket flashlight runtime charts

Wurkkos HD04 pocket flashlight runtime charts

Wurkkos HD04 pocket flashlight runtime charts

The temperature lines in these charts are included as general context, not precise measurements. The values represent the range (min to max) during testing, but should not be taken as exact readings. A temperature sensor is not always attached to the bezel (or even the hottest spot, assuming that could be defined). Even with ideal placement, too many variables affect temperature to definitively state a specific max value.

Charging

The Wurkkos HD04 Pocket flashlight has an uncovered USB-C charging port on the head. It still maintains an IPX6 waterproof rating.

Wurkkos HD04 pocket flashlight swivel head charging port

Wurkkos includes a USB-C to USB-C charging cable.

Wurkkos HD04 pocket flashlight charging cable

Charging is very consistent with A to C or C to C. Both look great. A full charge takes about an hour and a third.

Wurkkos HD04 pocket flashlight charging charts

Modes and Currents

Mode Mode Claimed Output (lm) Claimed Runtime Measured Lumens
Spotlight – Turbo 750 – 260 1m + 1h20m 664 (0s)
627 (30s)
Spotlight – High 375 – 260 – 150 5m+35m+1h15m 324 (0s)
321 (30s)
Spotlight – Medium 110 4h 94
Spotlight – Low 10 38h 9.5
Spotlight – Moonlight 1 86h 1.04
Floodlight – High 450 – 150 3m+1h30m 372 (0s)
345 (30s)
Floodlight – Medium 100 2h50m 84
Floodlight – Low 10 29h 8.5
Floodlight – Moonlight 1 75h 0.6

Pulse Width Modulation

The top row here is the spot output. The bottom row is four modes of flood, and the rightmost is the RGB channel. RGB is the only output to utilize PWM.

Wurkkos HD04 pocket flashlight PWM charts

Click here to see a “baseline” – a chart with almost no light hitting the sensor.

Then there’s the Ultrafire WF-602C flashlight, which has some of the worst PWM I’ve seen. It’s so bad that I used a post about it to explain PWM! Here are multiple timescales (10ms, 5ms, 2ms, 1ms, 0.5ms, 0.2ms) to make comparing this “worst” PWM light to the test light easier. That post also explains why I didn’t test the WF-602C at the usual 50us scale.

User Interface and Operation

There are two switches on the Wurkkos HD04 Pocket flashlight. One is the Mode button, and the other is the Brightness button (according to the manual names).

The switches are fine and have good action. They seem to have a metal cover and be generally identical.

Here’s a user interface table!

State Action Result
Off Click the Power button On (output and level memory)
Off Click the Mode button Red blinking (may be battery indicator)
Off Hold the Power button White: lowest level
RGB: On and then immediately advance RGB output
On Hold the Power button Advance mode of current LED
Spot on Double click power Spot Turbo
Highest, either white mode Double click power button Iterate between highest and lowest levels
On Click Power 3x Strobe
Strobe Click Power 2x Strobe Advance (Strobe > SOS > Beacon)
RGB on Click Power 2x Dynamic RGB options advance (Flashing (Red and blue) > Stepless Gradient Dimming > Warning Flash > Full-color breathing)
On Click Mode Advance output options (Spot > Flood > RGB)
RGB on Hold the Power button RGB Advance

LED and Beam

I don’t know that Wurkkos states what these emitters are, but I read (somewhere) that both white emitters are Luminus SST20. They’re vastly different in CCT, though. All three emitters are behind a TIR.

Wurkkos HD04 pocket flashlight side view

The names are accurate – flood is floody, and spot has a nice, tight profile.

LED Color Report (CRI and CCT)

The Spot emitter is low CRI and high(ish) CCT, peaking at around 6100K. The flood emitter, on the other hand, is high CRI and warm, staying right around 3900K. The flood emitter is very pleasant! It’s the second row, below.

CCT (Correlated Color Temperature) refers to the measurement of the color appearance of light, expressed in Kelvins (K), which indicates whether the light is warm (yellowish) or cool (bluish). A lower CCT (below 3000K) is considered warm light, while a higher CCT (above 5000K) gives cooler, bluish light.

CRI (Color Rendering Index) is a measure of how accurately a light source renders colors in comparison to natural sunlight. Scored on a scale from 0 to 100, higher CRI values indicate that colors appear more true to life and vibrant, similar to how they would look under the sun.

Beamshots

These beamshots always have the following settings:  f8, ISO100, 0.3s shutter, and manual 5000K exposure. These photos are taken at floor level, and the beam hits the ceiling around 9 feet away.

Tint vs BLF-348 (KillzoneFlashlights.com 219b version) (affiliate link)

I keep the test flashlight on the left and the BLF-348 reference flashlight on the right. These photos are taken around 18 inches from the door.

I compare everything to the KillzoneFlashlights.com 219b BLF-348 because it’s inexpensive and has the best tint!

Summary and Conclusion

The Wurkkos HD04 pocket flashlight is a fun gadget! I am very pleased with the flood emitter, because it’s warm and high CRI. The spot emitter is fine because it has a distinct and useful spot. It’s also reasonably high output (especially for such a small light). It’d be great if the battery were user-replaceable. If you need RGB, this is a good, inexpensive way to get it.

The Big Table

Wurkkos HD04 pocket flashlight
Emitter: Lumius SST20 (Spot and Flood
Price in USD at publication time: $27.99
Cell: Internal
Runtime Graphs
LVP? Yes
Switch Type: E-switch
Quiescent Current (mA): ?
On-Board Charging? Yes
Charge Port Type: USB-C
Charge Graph
Power off Charge Port Generally, yes, but not all modes.
Claimed Lumens (lm) 750
Measured Lumens (at 30s) 627 (83.6% of claim)^
Candela per Lumen 7.5
Claimed Throw (m) 120
Candela (Calculated) in cd (at 30s) 238lux @ 4.52m = 4862cd
Throw (Calculated) (m) 139.5 (116.3% of claim)^
Claimed CCT
Measured CCT Range (K) 3800-6100 Kelvin
Item provided for review by: Wurkkos
All my Wurkkos reviews!

^ Measurement disclaimer:  Testing flashlights is my hobby. I use hobbyist-level equipment for testing, including some I made myself. Try not to get buried in the details of manufacturer specifications versus measurements recorded here; A certain amount of difference (say, 10 or 15%) is perfectly reasonable.

What I like

  • Low cost
  • Gadget factor
  • High CRI, warm flood channel

What I don’t like

  • Battery can’t be replaced
  • Opposing buttons mean you can’t squeeze to activate

Notes

Leave a Comment

Your email address will not be published. Required fields are marked *