LoopGear Sk-06 Ti Mini flashlight

LoopGear Sk-06 Ti Mini Flashlight Review

LoopGear SK-06 Ti Mini Flashlight Review

The LoopGear SK-06 Ti Mini flashlight offers a dizzying array of outputs, has USB-C charging with a great charge port cover, and a robust titanium construction.


Official Specs and Features

Here’s a referral link to the official product page.

Versions

There are a couple of versions of the LoopGear SK-06. There’s this Mini and a non-Mini. This Mini is titanium, but aluminum is available as well. I believe the emitters and such are all the same (though the non-Mini does get an output bump).

Price

The current price is around $90, and the LoopGear SK-06 Ti Mini flashlight is available on Amazon or LoopGear’s site.
Amazon link. Code: BFCM05
Official Website (Shopify) link: https://loopgear.com?sca_ref=3901462.HqI0vJA3sd Code: Zeroair05

What’s Included

LoopGear Sk-06 Ti Mini flashlight what's included

  • LoopGear SK-06 Ti Mini flashlight
  • LoopGear 18350
  • Lanyard
  • Charging cable
  • Spare O-ring

Package and Manual

LoopGear Sk-06 Ti Mini flashlight box

LoopGear Sk-06 Ti Mini flashlight box

LoopGear Sk-06 Ti Mini flashlight manual

Build Quality and Disassembly

LoopGear Sk-06 Ti Mini flashlight

The LoopGear SK-06 Ti Mini flashlight is a neat little light. Key is that it’s little, as that’s mostly the point here. There’s a non-mini version too (review upcoming) that has the same features with higher output. So you’re sort of choosing this mini version specifically because it’s Mini (as there’s a non-mini titanium option, t00).

The body is very clearly titanium. You’ll note this if you ever unscrew the tailcap (after the first use, when you remove the battery insulator). The threads are a bit grainy! Or “titaniumy” – they’re very much titanium!

The threads are fairly short, and the thick tail spring holds a magnet in place.

LoopGear Sk-06 Ti Mini flashlight tailcap off showing spring and threads

The head end also has a spring.

LoopGear Sk-06 Ti Mini flashlight head spring

Size and Comps

3.08 x 1.02 x 1.02 in and 3.92oz.

Here’s the light in hand:

LoopGear Sk-06 Ti Mini flashlight in hand

Here’s the test light with the venerable Convoy S2+. This is a brass version, which is a good bit heavier than aluminum, but has the same dimensions: 24mm in diameter by 117.5mm in length.

Also in the photo above, my Standard Reference Material (SRM) flashlight is the Hanko Machine Works Trident, an 18350 light. While I have not reviewed or tested the Gunner Grip version seen here, I have tested a Hanko Machine Works Trident Total Tesseract in brass. I love the Trident, and it’s a striking contrast to the inexpensive Convoy S2+, another great SRM.

Retention and Carry

The LoopGear SK-06 Ti Mini flashlight package includes a lanyard. It’s a nice lanyard in the typical LoopGear style. Nicer than most cord lanyards!

LoopGear Sk-06 Ti Mini flashlight with lanyard

The only place to attach that lanyard is through this tailcap hole.

LoopGear Sk-06 Ti Mini flashlight lanyard hole

There’s a magnet in the tailcap too. It’s plenty strong to hold the LoopGear SK-06 Ti Mini flashlight in place. I think it’s removable, but I didn’t try.

LoopGear Sk-06 Ti Mini flashlight magnet in use

Power and Runtime

The LoopGear SK-06 Ti Mini flashlight runs on a single 18350 cell, which is included. It’s a standard cell, too, which is nice.

LoopGear Sk-06 Ti Mini flashlight with included cell

The cell goes into the light in the usual way: positive end toward the head.

LoopGear Sk-06 Ti Mini flashlight with included cell installed

Below you can see a few runtime tests on various modes. The highest three front white LED modes are included, as well as one (the highest) side white mode.

LoopGear Sk-06 Ti Mini flashlight runtime charts

Performance on Turbo doesn’t hit the 2000 lumen claim, and the stepdown is quick and dramatic. I still don’t hate the output, because an hour or so at a spotty 600 lumens is pretty useful.

LoopGear Sk-06 Ti Mini flashlight runtime charts

LoopGear Sk-06 Ti Mini flashlight runtime charts

LoopGear Sk-06 Ti Mini flashlight runtime charts

The side white output on the highest mode is just “relative” output – set to 100% initially, so you can see what the driver performance is like. It’s fine.

LoopGear Sk-06 Ti Mini flashlight runtime charts

The temperature lines in these charts are included as general context, not precise measurements. The values represent the range (min to max) during testing, but should not be taken as exact readings. A temperature sensor is not always attached to the bezel (or even the hottest spot, assuming that could be defined). Even with ideal placement, too many variables affect temperature to definitively state a specific max value.

Charging

The LoopGear SK-06 Ti Mini flashlight charges via USB-C. The little magnet-shut door is hard (not soft silicone) and I really like it!

LoopGear Sk-06 Ti Mini flashlight charging port open

A C to C cable is included.

LoopGear Sk-06 Ti Mini flashlight charging cable

Charging is very fast for this 1600mAh 18350. I imagine the charging circuit is the same for the Mini and non-Mini. For the Mini, this charge rate is too high!

LoopGear Sk-06 Ti Mini flashlight charging charts

Modes and Currents

Mode Mode Claimed Output (lm) Claimed Runtime Measured Lumens Tailcap Amps
Front Turbo 2000-365-20^ 50s+1.33h+3.63h 2003 (0s)
1486 (30s)
6.48
Front High 700-365-20 3m+1.28h+4.78h 878 (0s)
863 (30s)
2.29
Front Medium 245 2.65h 304 0.55
Front Low 40 19.55h 43 86.8mA
Front Moonlight <1 120d [low] 0.4mA
Side White High 75 2.83h – 1.05
Side White Medium 35 5.11h – 0.29
Side White Low 5 18.95h – 88.2mA
Side White Moonlight <1 120d – 0.5mA
Laser 1 – 28.68h – 39mA
Laser 2 – 39.45h – 20.4mA
Laser 3 – 68.57h – 4.5mA
UV – 1.71h – 0.49

Pulse Width Modulation

None of the white modes use PWM.

LoopGear Sk-06 Ti Mini flashlight PWM charts

Click here to see a “baseline” – a chart with almost no light hitting the sensor.

Then there’s the Ultrafire WF-602C flashlight, which has some of the worst PWM I’ve seen. It’s so bad that I used a post about it to explain PWM! Here are multiple timescales (10ms, 5ms, 2ms, 1ms, 0.5ms, 0.2ms) to make comparing this “worst” PWM light to the test light easier. That post also explains why I didn’t test the WF-602C at the usual 50us scale.

User Interface and Operation

The LoopGear SK-06 Ti Mini flashlight uses an e-switch for modes, but there’s a rotary selector around the e-switch. Using that rotary, you can select between the various types of output. In the state below, the white dot on the rotary indicates the light is in laser output.

LoopGear Sk-06 Ti Mini flashlight rotary switch

Next output is UV.

LoopGear Sk-06 Ti Mini flashlight rotary switch

Next are the side emitter options. And the one remaining (top left option) is the front white LED.

LoopGear Sk-06 Ti Mini flashlight rotary switch

Here’s a user interface table! The user interface depends a lot on the output you have selected with the rotary. It’s possible to change the output while the light is on (as you would expect).

State Action Result
Off – Rotary in front LED Click On (Memory)
Off – Rotary in front LED Hold Moonlight
On – Rotary in front LED Hold Mode advance (LMH only)
Off or On – Rotary in front LED Double click Turbo
On – Rotary in front LED Click Off
Off or On – Rotary in front LED Click 3x Strobe
Strobe – Rotary in front LED Hold Strobe cycle (Strobe > SOS > Beacon)
Off – Rotary in Laser Hold Laser Low
Off – Rotary in Laser Click Laser (memory)
On – Rotary in Laser Click Off
Off or On – Rotary in Laser Double click Laser highest, white LED on (unstated mode)
Off or On – Rotary in Laser Click 3x Laser highest, UV on
Off – Rotary in UV Click UV on
On – Rotary in UV Click Off
Off – Rotary in Side output Click On (level memory, color memory)
Off – Rotary in Side output Hold On Moonlight white
Off – Rotary in Side output Double click RGB memory
Off – Rotary in Side output Click 3x Red-blue flashing
Red-blue flashing – Rotary in Side output Hold Flash cycle (Red-blue > Red white > SOS > White beacon)
Off – Rotary in Side output Click 5x “E-tritium” cycle (Off > Red > Green > Blue)
On – Rotary in Side output Click 4x Side output advance (3 levels)
RGB On – Rotary in Side output Hold Color advance
RGB On – Rotary in Side output Double click RGB mode advance (breathing, etc)

It’s possible to adjust a thing or two on the RGB non-steady modes, too. See the manual for that information.

LED and Beam

I don’t believe LoopGear states what emitter is used in this light. It’s possibly a Luminus SFT42R.

LoopGear Sk-06 Ti Mini flashlight emitters

Above, you can see all the front options: White, UV, Laser. It’s feature-rich!

LoopGear Sk-06 Ti Mini flashlight emitter on

And the side outputs are many, too! Including a neat “E-Tritium” (not pictured below) that is very faint and should last a very long time.

LoopGear Sk-06 Ti Mini flashlight side emitters on

The laser is also a color I haven’t seen in a flashlight before. A sort of aqua color. I like it!

LoopGear Sk-06 Ti Mini flashlight laser on

LED Color Report (CRI and CCT)

The front emitter is low CRI and high CCT. The side white option (second row) is very nice, though! Warm and high CRI!

CCT (Correlated Color Temperature) refers to the measurement of the color appearance of light, expressed in Kelvins (K), which indicates whether the light is warm (yellowish) or cool (bluish). A lower CCT (below 3000K) is considered warm light, while a higher CCT (above 5000K) gives cooler, bluish light.

CRI (Color Rendering Index) is a measure of how accurately a light source renders colors in comparison to natural sunlight. Scored on a scale from 0 to 100, higher CRI values indicate that colors appear more true to life and vibrant, similar to how they would look under the sun.

Beamshots

These beamshots always have the following settings:  f8, ISO100, 0.3s shutter, and manual 5000K exposure. These photos are taken at floor level, and the beam hits the ceiling around 9 feet away.

Tint vs BLF-348 (KillzoneFlashlights.com 219b version) (affiliate link)

I keep the test flashlight on the left and the BLF-348 reference flashlight on the right. These photos are taken around 18 inches from the door.

I compare everything to the KillzoneFlashlights.com 219b BLF-348 because it’s inexpensive and has the best tint!

Summary and Conclusion

The LoopGear SK-06 Ti Mini flashlight is a feature-packed little light, with front and side lighting, UV, an unusual aqua-colored laser, and many RGB options. The titanium construction feels appropriately substantial, the magnetic tailcap is useful, and I like the rotary selector for switching between output types. Performance is mixed: Turbo steps down quickly, the front LED is cool white and low CRI, and the charging rate seems unnecessarily aggressive for the included 18350 cell. The warm, high-CRI side white output is a nice contrast, though. At around $90 (or less with the coupon), this is a lot of functionality in a very small package, but you’re buying it as much for its features and titanium construction as for its actual flashlight performance.

The Big Table

LoopGear SK-06 Ti Mini flashlight
Emitter: Unstated (Probably Luminus SFT42R) (Cool white)
Price in USD at publication time: $89.24
Cell: 1×18350
Runtime Graphs
LVP? Yes
Switch Type: E-Switch
Quiescent Current (mA): 0.1mA
On-Board Charging? Yes
Charge Port Type: USB-C
Charge Graph
Power off Charge Port No
Claimed Lumens (lm) 2000
Measured Lumens (at 30s) 1486 (74.3% of claim)^
Candela per Lumen 9.7
Claimed Throw (m) 210
Candela (Calculated) in cd (at 30s) 542lux @ 5.168m = 14476cd
Throw (Calculated) (m) 240.6 (114.6% of claim)^
Claimed CCT Cool white –
Measured CCT Range (K) Cool white
Item provided for review by: LoopGear
All my LoopGear reviews!

^ Measurement disclaimer:  Testing flashlights is my hobby. I use hobbyist-level equipment for testing, including some I made myself. Try not to get buried in the details of manufacturer specifications versus measurements recorded here; A certain amount of difference (say, 10 or 15%) is perfectly reasonable.

What I like

  • Lots of functionality packed into a very small titanium light
  • Rotary selector makes switching between output types straightforward
  • Useful combination of front and side lighting, UV, laser, and RGB
  • Warm, high-CRI side white output
  • Strong magnetic tailcap
  • Included standard 18350 cell
  • USB-C charging with a well-designed magnetic port cover
  • No PWM on any white-light mode
  • Good calculated throw, exceeding the manufacturer’s claim

What I don’t like

  • Turbo steps down quickly and dramatically
  • Front LED is cool white and low CRI
  • Charging rate is too high for the included 1600mAh 18350
  • Titanium threads feel grainy

Notes


Discover more from ZeroAir Reviews

Subscribe to get the latest posts sent to your email.

2 thoughts on “LoopGear Sk-06 Ti Mini Flashlight Review”

  1. Great review as always ! I surprised a $90 light has mediocre cri and bad finish. Loop feels like a marketing company then true to the geek. I almost bought one.

    1. Thanks! Yeah, this light might not be for CRI/CCT enthusiasts, but it has a feature set that will be very popular!

Leave a Comment

Your email address will not be published. Required fields are marked *

Discover more from ZeroAir Reviews

Subscribe now to keep reading and get access to the full archive.

Continue reading