LoopGear SK-06 Flashlight Review

LoopGear SK-06 Flashlight Review

The LoopGear SK-06 flashlight in aluminum offers a vast array of outputs, has USB-C charging with a great charge port cover, and a lightweight construction.


Official Specs and Features

Here’s a referral link to the official product page.

Versions

There are a couple of versions of the LoopGear SK-06. There’s a Mini and a non-Mini. Both are available in titanium, but aluminum is available in blue (as seen in this post). I believe the emitters and such are all the same (though the non-Mini does get an output bump).

Price

The current price is around $90, and the LoopGear SK-06 flashlight is available on Amazon or LoopGear’s site.
Amazon link. Code: BFCM05

What’s Included

LoopGear SK-06 flashlight what's included

  • LoopGear SK-06 flashlight
  • LoopGear 18350
  • Lanyard
  • Charging cable
  • Spare O-ring

Package and Manual

(I will have an updated version soon. I don’t know what this ended up fuzzy).

LoopGear SK-06 flashlight manual

Build Quality and Disassembly

The LoopGear SK-06 flashlight is a neat light. This light is essentially just like the titanium Mini I reviewed yesterday, so much of the verbiage will be similar. The main differences are body material (titanium or aluminum), cell size (18350 or 18650), and output.

The threads are fairly short, and the thick tail spring holds a magnet in place. These threads are very smooth (unlike the titanium threads, which are grainy in the way most titanium is grainy).

LoopGear SK-06 flashlight tailcap spring and threads

The head end also has a spring.

Size and Comps

4.23 x 1.02 x 1.02 in and 119g.

Here’s the light in hand:

LoopGear SK-06 flashlight in hand

Here’s the test light with the venerable Convoy S2+. This is a brass version, which is a good bit heavier than aluminum, but has the same dimensions: 24mm in diameter by 117.5mm in length.

Also in the photo above, my Standard Reference Material (SRM) flashlight is the Hanko Machine Works Trident, an 18350 light. While I have not reviewed or tested the Gunner Grip version seen here, I have tested a Hanko Machine Works Trident Total Tesseract in brass. I love the Trident, and it’s a striking contrast to the inexpensive Convoy S2+, another great SRM.

Below you can see the titanium mini beside the LoopGear SK-06 flashlight.

Retention and Carry

The LoopGear SK-06 flashlight package includes a lanyard. It’s a nice lanyard in the typical LoopGear style. Nicer than most cord lanyards!

LoopGear SK-06 flashlight lanyard

The only place to attach that lanyard is through this tailcap hole.

LoopGear SK-06 flashlight lanyard loop

There’s a magnet in the tailcap too. It’s strong enough to hold the LoopGear SK-06 flashlight in place. I think it’s removable, but I didn’t try.

LoopGear SK-06 flashlight magnet in use

A pocket clip is included, too.

LoopGear SK-06 flashlight pocket clip

It’s a friction-fit two-way clip that can attach only to the tail of the light.

LoopGear SK-06 flashlight pocket clip

Power and Runtime

The LoopGear SK-06 flashlight runs on a single 18650 cell, which is included. It’s a standard cell, too, which is nice.

LoopGear SK-06 flashlight with included cell

The cell goes into the light in the usual way: positive end toward the head.

LoopGear SK-06 flashlight with included cell in place

Below, you can see a few runtime tests on various modes. The highest three front white LED modes are included, as well as one (the highest) side white mode.

LoopGear SK-06 flashlight runtime charts

Performance on Turbo doesn’t sustain the 2400 lumen claim, and the stepdown is quick and dramatic. I still don’t hate the output, because an hour or so at a spotty 650 lumens is pretty useful.

LoopGear SK-06 flashlight runtime charts

LoopGear SK-06 flashlight runtime charts

LoopGear SK-06 flashlight runtime charts

The side white output on the highest mode is just “relative” output – set to 100% initially, so you can see what the driver performance is like. It’s fine.

LoopGear SK-06 flashlight runtime charts

The temperature lines in these charts are included as general context, not precise measurements. The values represent the range (min to max) during testing, but should not be taken as exact readings. A temperature sensor is not always attached to the bezel (or even the hottest spot, assuming that could be defined). Even with ideal placement, too many variables affect temperature to definitively state a specific max value.

Charging

The LoopGear SK-06 flashlight charges via USB-C. The little magnet-shut door is hard (not soft silicone), and I really like it!

LoopGear SK-06 flashlight charging port

A C to C cable is included.

LoopGear SK-06 flashlight charging cable

Charging is quick (but acceptable) for this 4000mAh 18350. I imagine the charging circuit is the same for the Mini and non-Mini. For the Mini, this charge rate is too high!

LoopGear SK-06 flashlight charging charts

Modes and Currents

Mode Mode Claimed Output (lm) Claimed Runtime Measured Lumens Tailcap Amps
Front Turbo 2400-600-20^ 40s+2.4h+9h 2474 (0s)
1872 (30s)
7.95
Front High 900-600-20 8m+2.31h+9h 881 (0s)
873 (30s)
1.90
Front Medium 300 7.23h 310 0.51
Front Low 40 47h 42 63.4mA
Front Moonlight <1 300d [low] 0.1mA
Side White High 100 3.65h – 0.97
Side White Medium 35 19.9h – 0.28
Side White Low 5 40.28h – 0.07
Side White Moonlight <1 300d – [low]
Laser 1 – 71.7h – 52.6mA
Laser 2 – 98.6h – 39.5mA
Laser 3 – 171.4h – 0.3mA
UV – 4.28h – 0.48

Pulse Width Modulation

None of the white modes use PWM.

LoopGear Sk-06 Ti Mini flashlight PWM charts

Click here to see a “baseline” – a chart with almost no light hitting the sensor.

Then there’s the Ultrafire WF-602C flashlight, which has some of the worst PWM I’ve seen. It’s so bad that I used a post about it to explain PWM! Here are multiple timescales (10ms, 5ms, 2ms, 1ms, 0.5ms, 0.2ms) to make comparing this “worst” PWM light to the test light easier. That post also explains why I didn’t test the WF-602C at the usual 50us scale.

User Interface and Operation

The LoopGear SK-06 flashlight uses an e-switch for modes, but there’s a rotary selector around the e-switch. Using that rotary, you can select between the various types of output. In the state below, the white dot on the rotary indicates the light is in laser output.

LoopGear SK-06 flashlight rotary switch detail

Next output is UV.

LoopGear SK-06 flashlight rotary switch detail

Next are the side emitter options. And the one remaining (top left option) is the front white LED.

The action is great, and the switch cover is very slightly domed (outward), making the switch fairly easy to find without looking.

Here’s a user interface table! The user interface depends a lot on the output you have selected with the rotary. It’s possible to change the output while the light is on (as you would expect).

State Action Result
Off – Rotary in front LED Click On (Memory)
Off – Rotary in front LED Hold Moonlight
On – Rotary in front LED Hold Mode advance (LMH only)
Off or On – Rotary in front LED Double click Turbo
On – Rotary in front LED Click Off
Off or On – Rotary in front LED Click 3x Strobe
Strobe – Rotary in front LED Hold Strobe cycle (Strobe > SOS > Beacon)
Off – Rotary in Laser Hold Laser Low
Off – Rotary in Laser Click Laser (memory)
On – Rotary in Laser Click Off
Off or On – Rotary in Laser Double click Laser highest, white LED on (unstated mode)
Off or On – Rotary in Laser Click 3x Laser highest, UV on
Off – Rotary in UV Click UV on
On – Rotary in UV Click Off
Off – Rotary in Side output Click On (level memory, color memory)
Off – Rotary in Side output Hold On Moonlight white
Off – Rotary in Side output Double click RGB memory
Off – Rotary in Side output Click 3x Red-blue flashing
Red-blue flashing – Rotary in Side output Hold Flash cycle (Red-blue > Red white > SOS > White beacon)
Off – Rotary in Side output Click 5x “E-tritium” cycle (Off > Red > Green > Blue)
On – Rotary in Side output Click 4x Side output advance (3 levels)
RGB On – Rotary in Side output Hold Color advance
RGB On – Rotary in Side output Double click RGB mode advance (breathing, etc)

It’s possible to adjust a thing or two on the RGB non-steady modes, too. See the manual for that information.

LED and Beam

I don’t believe LoopGear states what emitter is used in this light. It’s possibly a Luminus SFT42R.

LoopGear SK-06 flashlight emitters

Above, you can see all the front options: White, UV, Laser. It’s feature-rich!

LoopGear SK-06 flashlight emitter on

And the side outputs are many, too! Including a neat “E-Tritium” (not pictured below) that is very faint and should last a very long time.

LoopGear SK-06 flashlight side emitters on

The laser is also a color I haven’t seen in a flashlight before. A sort of aqua color. I like it!

LoopGear SK-06 flashlight laser on

LED Color Report (CRI and CCT)

The front emitter is low CRI and high CCT. The side white option (second row) is very nice, though! Warm and high CRI!

CCT (Correlated Color Temperature) refers to the measurement of the color appearance of light, expressed in Kelvins (K), which indicates whether the light is warm (yellowish) or cool (bluish). A lower CCT (below 3000K) is considered warm light, while a higher CCT (above 5000K) gives cooler, bluish light.

CRI (Color Rendering Index) is a measure of how accurately a light source renders colors in comparison to natural sunlight. Scored on a scale from 0 to 100, higher CRI values indicate that colors appear more true to life and vibrant, similar to how they would look under the sun.

Beamshots

These beamshots always have the following settings:  f8, ISO100, 0.3s shutter, and manual 5000K exposure. These photos are taken at floor level, and the beam hits the ceiling around 9 feet away.

Tint vs BLF-348 (KillzoneFlashlights.com 219b version) (affiliate link)

I keep the test flashlight on the left and the BLF-348 reference flashlight on the right. These photos are taken around 18 inches from the door.

I compare everything to the KillzoneFlashlights.com 219b BLF-348 because it’s inexpensive and has the best tint!

Summary and Conclusion

The LoopGear SK-06 flashlight is a feature-packed light, with front and side lighting, UV, an unusual aqua-colored laser, and many RGB options. The aluminum body seems (noticeably) lighter than the titanium option, which seems to make the titanium option just a personal preference. The magnetic tailcap is useful, and I like the rotary selector for switching between output types. Performance is mixed: Turbo steps down quickly, the front LED is cool white and low CRI, and the charging rate seems unnecessarily aggressive for the included 18350 cell. The warm, high-CRI side white output is a nice contrast, though. At around $85 (or less with the coupon), this is a lot of functionality in a good EDC package!

The Big Table

LoopGear SK-06 flashlight
Emitter: Unstated (Probably Luminus SFT42R) (Cool white)
Price in USD at publication time: $84.99
Cell: 1×18650
Runtime Graphs
LVP? Yes
Switch Type: E-Switch
Quiescent Current (mA): 0.1mA
On-Board Charging? Yes
Charge Port Type: USB-C
Charge Graph
Power off Charge Port No
Claimed Lumens (lm) 2400
Measured Lumens (at 30s) 1872 (78% of claim)^
Candela per Lumen 8.4
Claimed Throw (m) 260
Candela (Calculated) in cd (at 30s) 583lux @ 5.19m = 15704cd
Throw (Calculated) (m) 250.6 (96.4% of claim)^
Claimed CCT Cool white –
Measured CCT Range (K) Cool white 6100-6900 Kelvin
Item provided for review by: LoopGear
All my LoopGear reviews!

^ Measurement disclaimer:  Testing flashlights is my hobby. I use hobbyist-level equipment for testing, including some I made myself. Try not to get buried in the details of manufacturer specifications versus measurements recorded here; A certain amount of difference (say, 10 or 15%) is perfectly reasonable.

What I like

  • Lots of functionality packed into a good EDC-sized light
  • Rotary selector makes switching between output types straightforward
  • Useful combination of front and side lighting, UV, laser, and RGB
  • Warm, high-CRI side white output
  • Strong magnetic tailcap
  • Included standard 18650 cell
  • USB-C charging with a well-designed magnetic port cover
  • No PWM on any white-light mode

What I don’t like

  • Turbo steps down quickly and dramatically
  • Front LED is cool white and low CRI

Notes


Discover more from ZeroAir Reviews

Subscribe to get the latest posts sent to your email.

Leave a Comment

Your email address will not be published. Required fields are marked *

Discover more from ZeroAir Reviews

Subscribe now to keep reading and get access to the full archive.

Continue reading